Category Archives:
Essay Writing Help

In Figure, the logarithm of Er(t) versus the logarithm of In Figure, the logarithm of Er(t) versus the logarithm of time is plotted for polyisobutylene at a variety of temperatures. Make a plot of Er(10) versus temperature and then estimate itsTg. Is this the question you were looking for? If so, place your order here […]

If a component fabricated from an s-590 alloy (figure 8.30) If a component fabricated from an s-590 alloy (figure 8.30) is to be exposed to a tensile stress of 300mpa (43,500psi) at 650(c (1200(f), estimate its rupturelifetime. Is this the question you were looking for? If so, place your order here to get started!

If the specific surface energy for soda-lime glass is 0.30 If the specific surface energy for soda-lime glass is 0.30 J/m2, using data contained in Table 12.5, compute the critical stress required for the propagation of a surface crack of length 0.05mm. Is this the question you were looking for? If so, place your order […]

If it is assumed that, for steel alloys, the average If it is assumed that, for steel alloys, the average cooling rate of the heat-affected zone in the vicinity of a weld is 10째C/s, compare the microstructures and associated properties that will result for 1080 (eutectoid) and 4340 alloys in their HAZs. Is this the […]

Here are shown the atomic packing schemes for several Here are shown the atomic packing schemes for several different crystallographic directions for some hypothetical metal. For each direction the circles represent only those atoms contained within a unit cell, which circles are reduced from their actual size. (a) To what crystal system does the unit […]

If cupric oxide (CuO) is exposed to reducing atmospheres at If cupric oxide (CuO) is exposed to reducing atmospheres at elevated temperatures, some of the Cu2+ ions will become Cu+. (a) Under these conditions, name one crystalline defect that you would expect to form in order to maintain charge neutrality. (b) How many Cu+ ions […]

One slip system for the BCC crystal structure is {110} One slip system for the BCC crystal structure is {110} . In a manner similar to Figure, sketch a {110}-type plane for the BCC structure, representing atom positions with circles. Now, using arrows, indicate two different slip directions within thisplane. Is this the question you […]

Some hypothetical alloy is composed of 25 wt% of metal A and 75 wt% of metal B. Some hypothetical alloy is composed of 25 wt% of metal A and 75 wt% of metal B. If the densities of metals A and B are 6.17 and 8.00 g/cm3, respectively, whereas their respective atomic weights are 171.3 […]

One slip system for the HCP crystal structure is {0001} One slip system for the HCP crystal structure is {0001} . In a manner similar to Figure, sketch a {0001}-type plane for the HCP structure and, using arrows, indicate three different slip directions within this plane. You might find Figurehelpful. Is this the question you […]

On the basis of the structures presented in this chapter, On the basis of the structures presented in this chapter, sketch repeat unit structures for the following polymers: (a) Polychlorotrifluoroethylene, And (b) Poly (vinyl alcohol). Is this the question you were looking for? If so, place your order here to get started!