Category Archives:
Essay Writing Help

Refrigerant-134a at 140 kPa and -10°C Refrigerant-134a at 140 kPa and -10째C is compressed by an adiabatic 0.5-kW compressor to an exit state of 700 kPa and 60째C. Neglecting the changes in kinetic and potential energies and assuming the surroundings to be at 27째C, determine (a) The isentropic efficiency and (b) The second-law efficiency of […]

Refrigerant-134a at 400 psia has a specific Refrigerant-134a at 400 psia has a specific volume of 0.13853 ft3/lbm. Determine the temperature of the refrigerant based on (a) The ideal-gas equation, (b) The generalized compressibility chart, and (c) The refrigerant tables. Is this the question you were looking for? If so, place your order here to […]

Heating and Humidification of Air An air-conditioning system is to take in outdoor air at 10°C and… An air-conditioning system is to take in outdoor air at 10°C and 30 percent relative humidity at a steady rate of 45 m3/min and to condition it to 25°C and 60 percent relative humidity. The outdoor air is […]

Oxygen gas in a piston cylinder Oxygen gas in a piston cylinder at 300 K, 100 kPa with volume 0.1 m3 is compressed in a reversible adiabatic process to a final temperature of 700 K. Find the final pressure and volume using constant heat capacity from Table A.8. Is this the question you were looking […]

Air ( c p = 1.005 kJ/kg · °C) is to be preheated by hot exhaust gases in a cross-flow heat exchanger Air (cp = 1.005 kJ/kg · °C) is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. Air enters the heat exchanger at 95 kPa and […]

Repeat Problem 11.64, but assume that the isentropic compressor Repeat Problem 11.64, but assume that the isentropic compressor efficiency is 87%, the isentropic turbine efficiency is 89%, and the isentropic nozzle efficiency is 96%. Is this the question you were looking for? If so, place your order here to get started!

The ledger of Custer Company has the following work in process account The ledger of Custer Company has the following work in process account. Work in Process—Painting 5/1 Balance is 4,390 5/31 Materials 5,690 5/31 Labor 3,690 5/31 Overhead 2,160 5/31 Balance ? 5/31 Transferred out ? Production records show that there were 430 units […]

One type of feedwater heater for preheating the water before One type of feedwater heater for preheating the water before entering a boiler operates on the principle of mixing the water with steam that has been bled from the turbine. For the states calculate the rate of net entropy increase for the process, assuming the […]

Oxygen gas is compressed in a piston–cylinder Oxygen gas is compressed in a piston窶田ylinder device from an initial state of 0.8 m3/kg and 25ﾂｰC to a final state of 0.1 m3/kg and 287ﾂｰC. Determine the entropy change of the oxygen during this process. Assume constant specific heats. Is this the question you were looking for? […]

Use the information in problem 15.67 to estimate the enthalpy Use the information in problem 15.67 to estimate the enthalpy of reaction, Ho, at 1260 R us Oxygen at 50 lbf/in.2, 200 F is in a piston/cylinder arrangement with a volume of 4 ft3. It is now compressed in a polytropic process with exponent, n […]